80Kg/24Hr Commercial Gourmet Type Ice-Maker - Black
Product Features:
Ice Type: Gourmet Ice (Size (mm): (H) 34 (W) 28.5 (D) 34)
Spray System
60 Gourmet Ice Cubes Per Cycle
Gravity-Fed Drain System
45Kg Ice Storage Bin
External LED Display With On/Off Switch
Ice Full Sensor & Water Low Sensor
Specifications
-
Dimensions (mm) Assembled: (H) 1140 (W) 730 (D) 620
-
Dimensions (mm) Packaged: (H) 1140 (W) 730 (D) 620
-
Storage Bin Volume: 45Kg
-
Rated Current: 3.5A
-
Net Weight: 74Kg
-
Ice Type: Gourmet Ice
-
Ice Making Capacity: 80Kg/24h
-
Gourmet Ice Size (mm): H 34, W 28.5, D 34
-
Voltage: 220-240V/50Hz
-
Total Input Power: 665W
-
Design Criteria: Designed for African Conditions
-
Suggested Application Home Bar, Office, Commercial Operation, Canteen, Sports Bar, Pub, Gym
-
Note: We recommend a certified plumber installs your commercial ice-maker. These units have a gravity-fed drain point, thus the drain point must be lower than the ice-maker. Ensure to keep the unit well ventilated and clean the condenser regularly. *To maximize the ice-making performance of your commercial ice-maker, it’s ideal to have it in a steady environment with a 20°C ambient temperature and 10°C water temperature. While your ice-maker can handle higher temperatures, these conditions ensure peak production capacity. Adjustable Leveling Feet (+/- 150mm)
Product Display
Product Media
Frequently Asked Questions
FAQ
Why won’t my SnoMaster SM-80 Ice Maker turn on?
Possible Causes:
-
Ice maker is unplugged
-
Power switch is off
-
Ice storage bin is full
Solutions:
-
Plug the SnoMaster SM-80 into a working power outlet
-
Switch the unit on at the control panel
Why is no water entering my SM-80 Ice Maker after startup?
Possible Causes:
-
Water tap is closed
-
Water supply pipe not properly connected
-
Water filter missing or incorrectly fitted
-
Faulty water-inlet valve
Solutions:
-
Turn on the water tap
-
Reconnect or tighten the inlet pipe
-
Check and reinstall the water filter correctly
-
If water still won’t flow, contact SnoMaster Service
Why is my SM-80 making ice very slowly?
Possible Causes:
-
Dirty condenser
-
Poor airflow around the unit
-
High ambient or water temperature
Solutions:
-
Clean the condenser regularly to improve cooling efficiency
-
Ensure adequate ventilation around the ice maker
-
Keep the unit away from heat sources or direct sunlight
Why are my SM-80 ice cubes small or not forming properly?
Possible Causes:
-
Low water level in the bin
-
Water pressure below 2 bar
-
Blocked or leaking water line
Solutions:
-
Check that water pressure is between 2–4 bar
-
Inspect and clear any restrictions in the water line
-
Repair any leaks in the supply system
Why is water leaking from my SnoMaster SM-80 Ice Maker?
Possible Causes:
-
Normal condensation forming on the surface
-
Loose hose or pipe connection
-
Water filter incorrectly installed
Solutions:
-
Limit door openings or relocate the unit if condensation is excessive
-
Tighten all hose fittings
-
Reinstall or replace the water filter correctly










