200L Under-Counter Beverage Cooler - Stainless Steel

Crafted for elegant indoor and outdoor entertainment spaces, the SnoMaster – 200L Under-Counter Beverage Cooler – Stainless Steel (SMBC-200(SS)) pairs modern design with reliable, consistent cooling. The double-paned, argon-filled Low-E glass doors* offer a clear, refined display while helping to minimise condensation, and the stainless-steel finish brings a clean, contemporary look to patios, braai areas, and home bars. Adjustable powder-coated shelves, LED lighting, and secure door locks add everyday convenience, while fan-assisted, compressor-cooled performance and the energy-efficient inverter compressor ensure steady temperatures in African conditions. With front venting for easy built-in installation, the SMBC-200(SS) is made for stylish, social living. *Designed to reduce condensation; moisture may still occur in high humidity or with frequent door use.

Product Features:

Double-Paned, Argon-Filled Low-E Glass Doors*

Internal LED Control Panel, Door Locks & Internal LED Light Switch

Adjustable Powder Coated Shelves

Internal LED Control Panel

Fan Assisted Cooling & Compressor Cooled

Inverter Compressor & Front Venting

Designed For African Conditions

Make it yours:

R24,999.00
*Recommended Retail Price

Recommended Product*

  • Assembled Dimensions (mm): (H) 850 (W) 900 (D) 520
  • Packaged Dimension (mm): (H) 920 (W) 985 (D) 575
  • Capacity: 200L
  • Net Weight (Kg): 63Kg
  • Colour: Stainless Steel With Matching Interior
  • Temperature Range: 0°C to 10°C
  • Total Input Power: 175W
  • Rated Current (AC/DC): 1.2A
  • Voltage: 220-240V/50Hz
  • Suggested Applications: Kitchens, Home Bars, Entertainment Areas, Offices, Pubs & Restaurants
  • Note: Make sure that Under-Counter Beverage Coolers have enough room to “breathe” i.e. ventilation. Stifling can cause the unit to malfunction or sweat. *Measurements include door handles and hinges where applicable. Adjustable Leveling Feet (+/- 10mm)
  • Note: *Low-E, double-paned glass with argon gas is designed to minimise condensation, though moisture may still occur in high humidity or with frequent door use.

Unboxing & Set-up

Product Gallery

FAQ
Appliance is not turning on

• Check if the appliance is correctly switched on.
• Check if there has not been load shedding or a power cut.
• Check if plug is not faulty or damaged.
• Check if voltage is correct.

Temperature within the appliance is not getting cold enough

• Check that the appliance is not overloaded.
• Check if appliance is not placed in direct sunlight.
• Check if door is closed completely/ not frequently opening the appliance.
• Check door gasket if not sealing properly and check for damages or tears on the gasket.
• Check if the cooler does not have the correct clearances at the sides/back

Temperature within the appliance is too cold

• Please relocate the appliance to a warmer area, preferably at room temperature.
• Not enough ventilation around the unit.
• Check if Thermostat probe is not faulty, if so please contact SnoMaster support to replace.

Moisture forms on the inside/ outside walls of the appliance

• Hot and humid weather usually in the coastal locations increases the internal rate of condensation. This is normal.
• Set the temperature to a higher setting to avoid condensation.
• Condensation may occur seasonally depending on humidity and ambient temperature.
• Open the door less frequently and ensure it is closed properly at all times.

Exterior of appliance is wet

• Condensation will form on the outside of the appliance if it operates in humid areas or in the rainy season, simply wipe it dry with a non-abrasive cloth.