Confirm the unit is plugged into a dedicated 230V/50Hz power source.
Ensure the power switch is in the ON position and that there’s no power outage.
Check the plug and power cord for any visible damage.
Verify the circuit breaker (20A max) has not tripped.
Check that the water supply is connected and flowing.
If the filter is blocked, clean or replace it.
Confirm that the water pressure is between 2 – 4 bar.
The appliance will resume operation automatically once the water supply is restored.
The 6 kg ice storage bin is full — remove some ice to continue production.
If the indicator remains on, check that the ice full sensor is clean and unobstructed.
Once cleared, the unit will restart automatically.
Ensure the ambient temperature is below 32 °C and the area is well ventilated.
Check that the drain hose is not kinked or blocked.
Confirm the water inlet valve is open and the supply line is connected properly.
Inspect and clean the spray pipe and nozzles if blocked with scale or debris.
Switch off the appliance and unplug it.
Wait five minutes and restart.
If the FAULT light persists, contact a SnoMaster Service Centre or an accredited repair agent for assistance.