Featured Article

On most SnoMaster units, you can move the temperature controller from the side of the unit to the front, to suit you. You can choose

Possible causes: There is oil in the cooling system. The unit needs to be flushed and re-gassed Check that the filter dryer is clear –

The solenoid may be stuck. To resolve in an emergency, use the back of a screwdriver and gently tap the valve to release it.

Possible Causes: The condenser fan is not running. The condenser fan is dirty. The filter dryer is blocked. The unit is low on gas. The

The compressor system is blocked. There may be a leak in the refrigerant system / (Refrigerant fluid is leaking).

Check the voltage. Check the voltage cut-off setting. Check that there is enough ventilation (air-flow) around the cooler. Check that the vents, compressor and condenser

The cooler is not level or has been placed improperly Some parts may have come loose The baskets inside may be shifting around

The interior light is likely faulty. Please disconnect the light